MV Agusta BRUTALE 800 RR, Owner'S Manual

Page: 136 / 401

MAINTENANCE
6
6
EN
- 135 -
6.4.1. Topping up the engine oil level
To top up the engine oil level, remove the oil filler
plug by using the 10 mm hexagonal bar supplied,
assembled on a proper key (see figure). Pour an
appropriate amount of engine oil of the recom-
mended type (see § 6.3). Never exceed the MAX
level mark. At the end of the operation, place back
the oil filler plug.
WARNING
Before reassembling the oil filler plug,
grease its O-Ring by using AGIP Grease
30. Replace the oil filler plug and tighten
it to a torque of 35 Nm, by using a torque
wrench. Failure to replace or tighten the
oil filler plug may lead to oil spillage that
could result in engine seizure, loss of
control of the motorcycle, an accident,
personal injury or death.
CAUTION
To avoid clutch sliding and damage to
the engine, never add chemical addi-
tives to the engine oil, nor use an engine
oil different from the one specified in the
table at § 6.3. Make sure that no foreign
body gets in the crankcase while top-
ping up the engine oil.
Oil filler plug