MV Agusta BRUTALE 800 RR, Owner'S Manual

Page: 106 / 401

- 105 -
OPERATION
4
4
EN
4.8. Checks to be performed before riding
WARNING: A motorcycle can be in good
running order and then become unex-
pectedly unreliable if it was unused for a
short or long period of time. You must
carry out the inspections described in
the table below before each ride. A few
moments taken to carry out these
inspections will help you maintain your
motorcycle in optimum working order
and avoid unsafe situations that could
lead to loss of control of the motorcycle,
serious injuries or even death.
Brakes
Check fluid level (§6.7).
Check for fluid leakage.
Pull lever and press pedal to check brake operation.
Lubricate the lever joint, if necessary.
Check pads for wear (§6.6).
Gear lever
Press pedal to check gear operation.
Lubricate the lever joint, if necessary.
Clutch lever
Check fluid level (§6.8).
Check for fluid leakage.
Pull lever and check that it moves smoothly and gradually.
Lubricate the lever joint, if necessary.
Engine start button / stop switch
Check operation (§3.4).
Throttle twist grip
Check that grip rotates smoothly and returns to closed
position when released.
Steering system
Verify that the operation is smooth and uniform.
Check for play and loosening.
Lights, visual and acoustic signals
Check operation.
Tires
Check inflating pressure and wear (§6.9).
Suspensions
Verify that the operation is smooth and uniform.
Check adjustment (§5.6 and 5.7).
Frame fasteners
Check tightening of all screws and nuts.
Tighten them, if necessary.
Drive chain
Check adjustment and lubrication (§6.10).