Muton ValuejetVJ-1604, Maintenance Manual

Page: 354 / 422

9 Troubleshooting VJ-1604 Maintenance Manual
Rev.-00 9-32
17 Boot Transfer
failed
55-AA
Timeout AA did not
replied to Step
55 of boot code
transfer. Check connection
between control board
and MAIN board. • Reconnect control
board and MAIN
board.
• Replace the cable
connecting control
board and MAIN
board.
• Replace control
board.
• Replace MAIN
board.
" 4 . 4 . 3
Replacing
HEATER
CONT
Board" p.4-
42
" 4 . 4 . 7
Replacing
MAIN
Board" p.4-
49
18 Boot Transfer
failed
55-AA reply
error xx xx replied to
Step 55 of boot
code transfer.
19 Boot Transfer
failed
End code xx An error (xx)
replied to
transfer end of
boot code.
20 Boot Transfer
failed
Echo timeout Transfer
sequence echo
of boot code
did not reply.
21 Boot Transfer
failed
Echo error xx Invalid transfer
sequence echo
of boot code
did not reply.
22 Internal error
Parameter save
error Failed in
writing
parameter. Normally not occurred.
FROM may be
defective. Replace MAIN board.
" 4 . 4 . 7
Replacing
MAIN
Board" p.4-
49
23 Transfer failed
Wrong year
xxxx Invalid year
data (xxxx)
received. SODIMM or MAIN
board may be defective. • Replace SODIMM.
• Replace MAIN
board.
24 Transfer failed
Wrong month
xx Invalid month
data (xx)
received.
25 Transfer failed
Wrong date
xx Invalid day
data (xx)
received.
26 Transfer failed
Wrong hour
xx Invalid hour
data (xx)
received.
27 Transfer failed
Wrong min
xx Invalid minute
data (xx)
received.
Table 9-8 Error Messages During File Transmission (Continued)
No. Message Event/
symptom
Check item Action Reference