Muton ValuejetVJ-1604 Maintenance Manual Download Page 75

Page: 75 / 422

VJ-1604

Maintenance Manual

4 Parts Replacement

4-33

Rev.-00

4. Remove the screws (2 pieces) that retain the cover sensor (C) assembly_R.

5. Remove the cover sensor (C) assembly_R.

6. To reassemble the unit, reverse the removal procedure.

TIP

The cover sensor looks like the following.

(2) L Side

1. Remove the Side top cover L.

"4.2.7 Removing Side Top Cover L" p.4-14

2. Remove the switch cover L.

"4.2.13 Removing Switch Cover L" p.4-20

3. Detach the connector for the cover sensor (C) assembly_L.

No.

Part name

Cover sensor (C) assembly_R

Screws that retain the cover sensor (C) assembly_R
(pan-head screw with spring washer and flat washer M2

12)

Damper cover R

Opened

Closed

Summary of Contents for ValuejetVJ-1604







































































































































































































































































































































































































































Search results

Summary of Contents for ValuejetVJ-1604

Reviews:

Related manuals for ValuejetVJ-1604

Brands by name

Popular brands

Muton ValuejetVJ-1604, Maintenance Manual

Search results

Summary of Contents for ValuejetVJ-1604

Reviews:

Related manuals for ValuejetVJ-1604

Brands by name

Popular brands