Muton ValuejetVJ-1604, Maintenance Manual

Page: 117 / 422

VJ-1604 Maintenance Manual 4 Parts Replacement
4-75 Rev.-00
4. Remove the after-heater heat insulator from the part where the heater or the thermistor is broken.
TIP
The after-heater heat insulator and the after-heater are affixed using double-faced tape.
5. Mark the part where the after-heater is broken.
NOTE
Affix the after-heater at the correct position. If not, the temperature of the media guide F (upper)
cannot be appropriate and image quality may be affected.
6. Remove the broken after-heater.
7. Replace the after-heater.
No. Part name
1 Media guide F (upper)
2 After-heater
3 After-heater heat insulator
2
1
3
Rear view of media guide F