Muton ValuejetVJ-1604 Maintenance Manual Download Page 100

Page: 100 / 422

4 Parts Replacement

VJ-1604

Maintenance Manual

Rev.-00

4-58

4.5 Replacing Board Base Section (Y Rail Section)

This section describes the procedure to replace the boards in the Y rail section.

4.5.1

Replacing Heater Junction Board Assembly

CAUTION

• Before you replace a board assembly, remove the AC inlet cable.

You may suffer electric shock due to standby current.

• When you handle a circuit board, do not touch any devices on it with bare hands.

Doing so may cause electrostatic discharge and damage the devices.

1. Move the carriage to the opposite side of the origin.

"4.8.1 Releasing Head Lock" p.4-105

2. Remove the side top cover R.

"4.2.6 Removing Side Top Cover R" p.4-12

3. Remove the cartridge cover (upper).

"4.2.9 Removing Cartridge Cover (Upper)" p.4-17

4. Detach the connector to the heater junction board assembly.

Table 4-5 Connectors to Heater Junction Board Assembly

No.

Connector

No.

# of

Pins

Color

Connect to

Remark

Config CN

White

DC IN -> HEATER CONT (J8)

Communication -> HEATER CONT (J9)

LAN

White

HEATER CONT (J10)

Option

White

INK SLOT1

White

INK SLOT2

White

INK SLOT3

White

INK SLOT4

White

Not in use

J10

White

Not in use

J11

White

SubTank1

J12

White

SubTank2

J13

White

SubTank3

Summary of Contents for ValuejetVJ-1604







































































































































































































































































































































































































































Search results

Summary of Contents for ValuejetVJ-1604

Reviews:

Related manuals for ValuejetVJ-1604

Brands by name

Popular brands

Muton ValuejetVJ-1604, Maintenance Manual

Search results

Summary of Contents for ValuejetVJ-1604

Reviews:

Related manuals for ValuejetVJ-1604

Brands by name

Popular brands