manualshive.com logo in svg

MUTOH VJ-626UF, Operation Manual

Share
Download
MUTOH VJ-626UF Operation Manual Download Page 9

Name of each part     9

Operation panel

Error indicator

Lights up in orange when an 
error has occurred or a cover is 
open.
Flashes when the ink is low.

Display

Displays the printer status, 
setting menu, errors and so on.

Power button

Press it to turn the power on.
Lights steady in blue when the 
power is on.
Press it again to turn the power 
off. The button turns off while 
in power off.
The button flashes while 
receiving data or in sleep 
mode.

[Reference]

The          symbol means “standby”. Even 

when the power button is not turned 

on, the printer consumes a tiny 

amount of power so long as the power 

cable is connected. This state is 

referred to as the power being “off” in 

this Manual.

[Option] indicators

Lights steady green when using 
Rotary Unit (option).

[Media Set] indicator

Lights steady green when a 
media has been set in place and 
the printer is ready to print.

[Low speed] indicator

Lights steady green, except 
when [Low speed] is turned Off.

[Cleaning Mode] indicators

Light steady green to indicate 
the head cleaning mode.

[Enter] key

When you have set a media in 
place, pressing and holding this 
down for 2 seconds or longer 
will run a media set check.

When setting the menu:

Press this to go to the menu 
item you select.
Press this to confirm a set 
value.

[>] / [Cleaning Mode] key

For changing the cleaning 
mode.
Long press this key for more 
than 2 seconds to execute 
head cleaning.

When setting a value:

Press this to move to a lower 
level of menu items.
Press this to change a set value.

[+] / [Set Media] key

Press this key after loading
media to put the printer into 
ready-to-print status.
Long press this key for more than 
2 seconds to move to “Height” 
setting menu.

[Pause] / [Cancel] key

Press this key to pause printing.
Long press this key for more 
than 2 seconds to cancel the 
print job and delete the data 
received.

When setting a value:

Cancels a change of a setting 
value.

[ - ] / [Remove Media] key

Press this key after printing to 
remove media from the table.

When setting a value:

Press this to move to another 
menu item
Press this to change a set value.

[<] / [Nozzle Check] key

Long press this key for more 
than 2 seconds to run a nozzle 
check.

When setting a value:

Press this to change a set value.

[Menu] key

Press this key to access to or exit 
the menu.

When setting a value:

Press this to move to another 
menu item
Press this to change a set value.

Summary of Contents for VJ-626UF

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands