User’s Guide ViperTX Extreme
Printer menu
84
AP-75340 - Revision 1.0
HeadHeight
Set the distance (head height) between the print head and the fabric.
Choose the best head height in relation to the amount of fibres sticking out of the fabric
Always try to work with the lowest head height to obtain the best printing quality.
When the printheads touch the fabric or the fabric fibres while printing, set the head
height one setting higher.
Thickness
Set the thickness of the fabric.
Distance adjustment
Preferably use the distance adjust test pattern described in the following chapter:
Refer to
Ú»¿¬«®»- ¬± ·³°®±ª» °®·²¬ ¯«¿´·¬§ â Ú¿¾®·½ º»»¼ ½±³°»²-¿¬·±² ø-¬»°÷ ±² °¿¹» ìï
Menu
Parameter
Description
HeadHeight
Low
Distance between head and fabric will be 1,2 mm
Middle
Distance between head and fabric will be 2 mm
High
Distance between head and fabric will be 4 mm
CANCEL
Go back to previous menu without storing the menu
Menu
Key
Description
InkDryTime
50µm-1500µm
F2
Increase value
F4
Decrease value
ENTER
Store set value
CANCEL
Go back to previous menu without storing the menu
Ý¿«¬·±²
It is very important to set the correct fabric thickness to obtain a good print
quality!
