User’s Guide ViperTX Extreme
Basics
AP-75340 - Revision 1.0
41
3
3.5.3
Fabric feed compensation (step)
Obtaining constant printing quality on a wide-format Piezo inkjet printer is not only determined
by the working environment, the RIP, the profiles, the inks and the fabrics which are used.
One of the key factors for obtaining constant output quality is the correct distance adjustment,
also called “step”, on your Mutoh inkjet printer.
Basics about the step
Every image is printed in several print passes. After every pass, the fabric is fed an amount of
millimetres. When the step is not set correctly, the passes will overlap each other or will not
be printed precisely next to each other, which results in white bands between two print
passes.
Therefore a function, distance adjust (or step), is added to the menu to control this feed
operation.
Underfeed
Step between the print passes is too small which results in the passes to overlap each other.
Overfeed
Step between the print passes is too large which results in the passes to be printed too far
from each other.
Ю·²¬ °¿-- ï
Ю·²¬ °¿-- î
Ю·²¬ °¿-- è
Ю·²¬ °¿-- ç
ò
ò
ò
Ю·²¬ °¿-- ï
Ю·²¬ °¿-- î
Ю·²¬ °¿-- è
Ю·²¬ °¿-- ç
ò
ò
ò
