User’s Guide ViperTX Extreme
Basics
AP-75340 - Revision 1.0
37
3
ͬ»° ïëæ
Take the centre of the fabrics at the front of the printer and pull it straight down until
the rear tensioning system
gently
hits the back of the machine. This to become an
equal tension.
ͬ»° ïêæ
Tape the fabric to the core installed between the front roll units. Make sure to have
an equal tension on both sides of the fabrics.
ͬ»° ïéæ
Install the fabric retainers if necessary.
Refer to
л®º»½¬ º¿¾®·½ ¸¿²¼´·²¹ â Ú¿¾®·½ ®»¬¿·²»®- ±² °¿¹» íï
ͬ»° ïèæ
Close the front cover.
ͬ»° ïçæ
Lower the pressure rollers by pressing the
F4
key or using the footpedal.
ͬ»° îðæ
The printer will show the following message.
Press
enter
to start the fabric initialization
N°
Description
ï
Roll Unit
î
Empty core
í
Front swingbar
