User’s Guide ViperTX Extreme
Printer menu
104
AP-75340 - Revision 1.0
AutoClean
In normal printing conditions, it is not recommended to use this function. When experiencing
regular nozzle loss, one of the three AutoCleaning features can be used. When using this
function, the wiping activity will be much higher, so be sure to securely perform your daily and
weekly maintenance.
EdgePrinting
For some applications, it is necessary that the fabric is fully printed, without any margins. This
menu gives you the opportunity to print over the edge. The parameter can vary between - 5
mm and + 50 mm. Minus 5 mm is the standard margin, 0 is the edge of the fabric and + is
overprinting.
RemPanel and Remoteconn
These functions are meant for internal use only.
Menu
Parameter
Description
AutoClean
Waiting
To perform a little, normal, powerful cleaning while
printer is idle for
1
/
2
; 1; 2; 3; 4; 5; 6; 9; 12; 18 or 24
hours.
Printing
To perform a little, normal, powerful cleaning after 5,
10, 15, 20, 30, 45, 60, 90, 120, 150 and 180 minutes
of printing.
BeforePrint
To perform a little, normal, powerful a cleaning before
every job.
CANCEL
Go back to the previous menu
Menu
Key
Description
Edge Printing
OFF
ON
- 5 mm
+ 50 mm
F2
Increase value
F4
Decrease value
ENTER
Store set value
CANCEL
Go back to previous menu without storing the menu
