MUTOH Viper TX Softsign, User Manual

Page: 149 / 196

User’s Guide Viper TX Softsign
Printer menu
AP-75360 - Revision 1.2 149
5
ErrorDisplay
To set display method to the operation panel when minor error occurred.
FabricDetection
When loading fabrics, the printer will start initializing the fabric. Depending on the position of
the fabric and the use of a winding system, the setting should be changed.
Menu Parameter Description
Error display
Off Do not show the error
On Show the error
CANCEL Go back to the previous menu
Menu Parameter Description
Fabric
detection
Normal
The fabric detection will be done automatically. As
well the left, right as front side of the fabric will be
measured.
Off
No automatic fabric detection will be done.
You should also set the fabric width and start position
manually. Refer to
and
TakeUpRoll
Use this setting when working with Mutoh’s
Unwinder/Winder 100 and the fabric is loaded at
the right side.
Only the left and right side of the fabric will be
measured.
The fabric can not be fed backwards.
RollFeed
Use this setting when working with Mutoh’s
Unwinder/Winder 100 and the fabric is centre
loaded.
Only the left and right side of the fabric will be
measured.
CANCEL Go back to the previous menu