MUTOH Viper TX Softsign, User Manual

Page: 137 / 196

User’s Guide Viper TX Softsign
Printer menu
AP-75360 - Revision 1.2 137
5
Direction
Set print head moving direction for printing.
HeadSet
Select the head set mode when it is impossible to set this in your RIP software.
Refer to
Í»¬«° ³»²« îñé â Ю·²¬Ó±¼» â É»¿ª·²¹ ±² °¿¹» ïíè
for a complete overview table
of the possibilities.
Menu Parameter Description
Direction
UniDir Only print in 1 direction (right to left)
BiDir Print in both directions
CANCEL Go back to the previous menu
Menu Parameter Description
HeadSet
Native
For 4, 6 or 8 colour modes, the printer will use
respectively 4, 6 or 8 heads.
This mode is not recommended when printing in 4
colour mode but necessary when printing in mixed
cassette setup (dye/pigment). For the 6 and 8 colour
modes, it is only possible to print in this head set.
Fast (HD)
This menu option will allow you to use the following
FAST (highest speed) modes.
FAST HD 360 360x360 dpi
FAST 540 540x720 dpi
FAST 720 720x720 dpi
Only possible in 4 colour mode. The printer will use all
8 heads.
Double D
As well headset 1 (head 1-4) and headset 2 (head
5-8) will print the same pattern
double density to
obtain high ink load. Only possible in 4 colour mode.
CANCEL Go back to the previous menu