MUTOH Viper TX Softsign, User Manual

Page: 77 / 196

User’s Guide Viper TX Softsign
Printer handling
AP-75360 - Revision 1.2 77
3
3.6.4 Pause option
When printing on hairy fabrics, it might be possible that some fibres stick to the print heads
and build-up which could lead to a bad print result. When this occurs, it is possible to pause
the job and clean the heads as follows:
ͬ»° ïæ
Press F4 to pause the job.
ͬ»° îæ
Press enter to unlock the carriage.
ͬ»° íæ
Open the front and left maintenance cover.
ͬ»° ìæ
Slide the carriage into the left maintenance area.
ͬ»° ëæ
Clean the edges of the heads with a cleaning swab wetted with Mutoh waterbased
textile cleaning. Be sure not to touch nor clean the nozzle plate to avoid damage
and bad printing quality.
ͬ»° êæ
Close the front and left maintenance cover.
ͬ»° éæ
Press
enter
to make the carriage go back to its home position.
f
ͬ»° èæ
Press
F4
to resume printing.
׳°±®¬¿²¬
The fabric loading system does not move anymore, which means that a piece
of the printed fabric (± 60 cm) will be fixed for a longer time of the rest. This
could lead into output mismatches. Therefore, avoid pausing the printer during
a long job.