Rockhopper II series printers – Maintenance Manual
83
AP-74065, Rev. 1.2, 27/09/04
(2) Replacing the transmission photosensor (CR origin side)
Notes :
¾
Refer to ‘Head Lock Menu’
Step 1 :
Unlock the head.
Step 2 :
Move the carriage from the capping position to the left.
Step 3 :
Remove the transmission photosensor from the ORG sensor installation board.
1 = ORG sensor installation board
2 = Connector
3 = Transmission photosensor
Notes :
¾
The ORG sensor installation board has been adjusted at the origin in factory. Do
not loosen the fixed screws.
Step 4 :
Remove the connector from the transmission photosensor.
Step 5 :
Remove the transmission photosensor.
Step 6 :
Apply the screw lock to the tab portions of the transmission photosensors to be installed.
Step 7 :
Reinstall all parts in the opposite order of the removal procedure.
Summary of Contents for Rockhopper II 2H
