MUTOH Rockhopper II 2H, Maintenance Manual, Page: 181 / 319

Rockhopper II series printers – Maintenance Manual
182 AP-74065, Rev. 1.2, 27/09/04
(5) Mechanical parameter
Update the mechanical position parameters. The setup items are as follows.
¾
Top distance
¾ Bottom distance
¾ Side margin
¾ P_REAR sensor position
* Mechparm *
Top Length 0 – 40.0 +
5.0 mm -
* Mechparm *
Bottom 0 – 40.0 +
5.0 mm -
* Mechparm *
Side 0 – 20.0 +
5.0 mm -
* Mechparm *
Rear Sensor 0 – 27.0 +
17.0 mm -
↓
ENTER
* Mechparm *
Update Parameter
↓
ENTER
* Mechparm *
Updating Parameter