MUTOH DT-Series, Operation Instructions Manual

Page: 93 / 96

Mutoh’s DT-Series Printers – Operation Instructions
93
AP-75171, Rev. 1.1, 25/06/04
Makes various print mode
settings.
Colour Mode Sets when 4 colours of ink
cartridges of 4 colours are
loaded for the 87-inch
specification printer.
360x360 dpi
720x360 dpi
360x720 dpi
Diagonal 720 dpi
720x720 dpi
1080x1080dpi
1440x720 dpi
720x1440 dpi
Diagonal 1440
dpi
1440x1440 dpi
2160x1080 dpi
1080x2160 dpi
Diagonal 2160
dpi
280x1440 dpi
1440x2880 dpi
Diagonal 2880
dpi
Quality
Makes settings for print
quality.
UniDir
Direction
BiDir
Makes settings for the
operation direction of the
head during printing.
Count Once to 99
times
Makes settings for the
number of print repeat on a
print data. Repeat
Interval 0.0 sec to 0.1 to
5.0 sec
Makes settings for the end of
printing to the start of printing.
Normal
Normal speed
Print Mode 1
Head Speed
Fine
Speed / 2
Set the head speed.
Print Mode 2 Same as Print Mode 1
Print Mode 3 Same as Print Mode 1
Print mode
setting
Print Mode 4 Same as Print Mode 1
Makes various printer
commands settings
Command MH-GL,GL2 /
MH-GL2 /
RTL-
PASS
Makes preference settings for
he printer command sent from
a computer to the printer.
Step
0.025 mm /
0.010 mm
Makes settings for feeding
increments while printing.
Position P1 / LL / Full Makes settings for the initial
start point of printing.
Terminat Normal /
Special
Makes settings for the
functions of the ending printer
command included in printing
data.
ImageResolu.
360dpi /600dpi
/720dpi /1080dpi
/1200dpi
/1440dpi
/2160dpi
/2880dpi
Makes settings for image
resolution while printing with
image data.
OnlineTimer Off / 2 sec to 30
sec to 800 sec
Makes settings for the time
from the end of receiving
printing data from a computer
to recognizing the end of
printing data.
Overwrite
Last / Mix Makes settings for how to
print the part over wrapped
between diagrams.
Command
setting
Halftone
speed / quality /
Thin
Makes settings for tone
rendering method while
printing with MH-GL/GL2 data
or not digitalized.