Mutoh’s DT-Series Printers – Operation Instructions
56
AP-75171, Rev. 1.1, 25/06/04
Step 11 :
Set the unwinder (REAR) unit to AUTOMATIC until the media reaches the empty core and the
rear tensioning system is turned against the unit.
Step 12 :
Set the unwinder (REAR) unit to MANUAL.
Step 13 :
Use some tape to fix the media end to the empty core installed at the winder unit. Start taping
the middle of the media. Then the both ends. Do not apply tension on the media.
Step 14 :
Lower the pressure rollers.
Step 15 :
Set the winder and unwinder units AUTOMATIC.
Step 16 :
Close the front cover.
Step 17 :
Installation of the media is completed.
Caution :
•
Make sure the media is loaded straight.
Caution :
•
After installation of media, be sure that the correct media thickness is set!
Summary of Contents for DT-Series
