MUTOH DT-Series, Operation Instructions Manual

Page: 12 / 96

Mutoh’s DT-Series Printers – Operation Instructions
12
AP-75171, Rev. 1.1, 25/06/04
¾
Be sure to do the following before attaching options.
o
Turn the printer off.
o
Unplug the power cord from the socket.
o
Unplug cables connected to the printer. Otherwise, damage to the printer or your computer
may occur.
o
Remove electrostatic charge from your clothes and body by touching the metal parts of the
printer.
o
Electronic components such as the memory may malfunction if exposed to an electrostatic
charge.
¾
The unit is delivered / shipped with special shipping liquid. This to prevent air coming into the ink
supply system. Make sure that air never comes into the ink supply system.
1.4. WARNING LABELS
The handling, attachment locations, and types of warning labels are explained below.
Warning labels are attached on areas which require attention. Read and understand the positions and
contents thoroughly before performing your work.
1.4.1. Handling the warning labels
Be sure to note the following when handling the labels.
Notes :
•
Make sure that all labels can be recognized. If text or illustrations cannot be seen
clearly, either clean or replace the label.
•
When cleaning labels, use a cloth with water or neutral detergent. Do not use a
solvent or gasoline.
•
If a warning label is damaged, lost or cannot be recognized, replace the label.
When replacing warning labels, contact your local MUTOH dealer.