MUTOH DT-Series, Operation Instructions Manual

Page: 58 / 96

Mutoh’s DT-Series Printers – Operation Instructions
58
AP-75171, Rev. 1.1, 25/06/04
Setup items
Key Parameters Description
Roll media Media type F2
Sheet media
Alternates the roll media type.
• Roll media : Set when loading roll media.
• Sheet media : Set when loading sheet media.
Lever up Lever Down/Up F3
Lever down
Switches between up and down motion of the
pressurizing lever.
Use this when starting over from the media setup.
User 1
User 2
User 3
User 4
User 5
User 6
User 7 Media Type F4
User 8
Set media type for printing.
For setup values of printing operation, eight settings
of "user 1-8" can be set.
Refer to ‘Menu setup on the operation panel’
Step 3 :
Press the [Enter] key on the operation panel.
¾
The media type has been set.
¾
"Media Initial" is displayed on the LCD, and the printer starts the media initial operation.
Notes :
•
The printer starts the media initial operation if you :
o
Press the [CANCEL] key on the operation panel
o
Leave the printer for 10 seconds without doing anything
Paper Initial
User 1
Step 4 :
When the media initial operation finishes, the printer moves to normal status.
¾
The setting media loading procedure has been completed.
Print OK
Heaters Cleaning
Cut&Feed Lever Up
User1 xxxm