Mutoh’s DT-Series Printers – Operation Instructions
68
AP-75171, Rev. 1.1, 25/06/04
3.11. CONTROLLING THE HEATER ELEMENTS
If you want to change or check the heater elements, follow the steps below.
Step 1 :
Press the [F1] key on the operation panel.
¾
The printer works as follows.
OK
F1
→
Heaters Cleaning
←
F2
F3
→
Cut&Feed LeverUp
←
F4
User1
xxxm
By pressing the [F1] key, you will have direct access to control or change the heaters
temperatures.
After pressing the [F1] key in the normal status, the operation panel will mention the following :
* Heaters *
F1
→
A : S 50 – R 50
F3
→
D : S 50 – R 50
SET ON
←
F4
heater
message
The ‘heater message’ can be one of the following :
Heater standby
Heater warming up
Heater ready
‘A’ stands for the rear heaters.
‘D’ stands for the dryers.
‘S’ stands for the Set-temperature (requested temperature).
‘R’ stands for the Real-temperature (actual temperature).
3.11.1. Change the rear heater temperature
To change the temperature of the rear heaters, press the [F1] key on the operation panel. The display will
mention the following :
* Heater (A) *
OFF – 50°C
+
←
F2
50°C -
←
F4
F2, F4
→
ENTER
Press the [F2] key to decrease the temperature.
Press the [F4] key to increase the temperature.
Press the [ENTER] key to confirm the requested temperature change.
Press the [CANCEL] key to leave the menu without changing the rear heater settings.
Summary of Contents for DT-Series
