LOCATION AND DESCRIPTION OF CONTROLS
DAB/DAB+ DUAL ALARM CLOCK RADIO
GB
1.
Alarm 1
button
2.
Alarm 2
button
3.
Sleep
button: to fell asleep with the radio
4.
Preset
button: preset the station in DAB/DAB+ or FM mode
5.
Mode
/
Menu
button
6.
button: Station down; setting down
7.
Station
/
Select
/
Info
button
8. button: Station up; setting up
9.
Volume
+
/
-
button
ACCESSORIES
USB power supply adaptor x1
USB power cable x1
POWER SUPPLY
AC ADAPTOR
The supplied AC adaptor is suitable for use on AC main supplies of AC 100-240V
50/60Hz and should only be connected to a mains supply
within these parameters.
Cautions:
• The AC adaptor included with this unit is for its use only. Do not use it with other equipment.
• Turn off the unit before unplugging the AC adaptor from the unit so as to avoid the unit being damaged.
• When the unit is not going to be used for long time, disconnect the AC adaptor from the AC outlet.
• Be sure to use it near the wall outlet and easily accessible. If a malfunction occurs, disconnect the plug from the wall outlet at once.
• AC adaptor is used as the disconnect device. It shall remain readily operable and should not be obstructed during intended use. To be
completely disconnected the apparatus from supply mains, the AC adaptor of the apparatus shall be disconnected from the mains socket
outlet completely.
• Never use an AC adaptor that is damaged, route power lead in a safe manner and make sure it is not subjected to trapping or pinching. If
the power lead is damaged refer to a qualified service agent.
TURN ON/ OFF THE UNIT
In standby mode, press
button to turn on the unit. Press this button again to turn off the unit.
TIME AND DATE SETTING
Connect the AC adaptor from the unit to AC outlet, the time will flash.
3. The date “1-1-14” digital will blink. Press
and
button to adjust the date, month, year value. Press
Select
button, time setting is
finishing. The unit will automatically enter into alarm status setting mode. “ALRM CHG” will be displayed.
Note: Please refer to “
SETTING THE ALARM AND THE ALARM MODE
” for alarm status setting.
BAND SELECTION
When the unit is on, repeatedly press
Mode
button to select DAB/DAB+ or FM band.
VOLUME ADJUSTING
To increase or decrease the sound level, press
Volume
+
/
-
button.
LISTEN TO DAB/DAB+ RADIO
Automatic search
1. In DAB/DAB+ mode, press and hold
Menu
button to enter into the menu mode.
2. Press or
button to select “FULL SCAN” and press
Select
to start automatic search. Once scan is complete, the radio returns to play
the previously-selected station or first station on the station list.
Noted: When this is the first time you use, or if the station list is empty, the radio will automatically scan and create a list of receivable DAB/
DAB+ broadcasts.
Manual Search
1. Press and hold
Menu
button to enter menu setting mode.
2. Press or
button to select “MANUAL” in options menu. Press
Select
button to confirm
3. Press or button again to select your desire frequency. Press
Select
button to confirm.
4. The unit will automatically scan the station under selected frequency. The display shows a live indication of the received signal strength on
the selected frequency.
5. Choose your radio station with
or button. Then press
Select
button to turn to your desire station.
Note:
- If no broadcasts are found by DAB/DAB+ scan, “NO DAB” appears in the display.
- For a better reception, extend the telescopic antenna or do the full scan again in another place.
- During the search operation, the sound level is automatically muted.
Listen to FM radio
In FM radio mode, press
or button once to manual tuning. Press and hold or button to automatic search.
Note: For a better reception, extend the telescopic antenna.
PRESET
This unit can store 10 FM and 10 DAB/DAB+ stations.
1. Repeatedly press
Mode
button to select FM or DAB/DAB+ band.
2. Select a radio station manually or automatic search.
3. Press and hold
Preset
button to enter to preset store mode.
4. Press or button to select a channel.
Noted: If you choose a station that hasn’t been allocated, “EMPTY” will be displayed. If the station has been allocated before, the frequency
will be showed.
5. Press
Select
button to save it, “STORED” will be displayed.
6. Repeat step 1-5 to store other stations.
Listening to station presets
1. Press
Mode
button to select FM or DAB/DAB+ band.
2. Press
Preset
once, then press or to select your desire station.
3. Press
Select
to confirm your selection.
4. Press
/
-
button to adjust the sound level
SETTING THE ALARM AND THE ALARM MODE
Turn on the unit when the time has been set.
1. Press
Alarm 1
button once, then press
Select
button, “ ” indicator will blink.
2. Press and
to set the time of wake up, press
Select
to confirm.
Noted: In 12 hour clock format, be sure to observe the AM/PM indicator to set correctly.
3. Press and
to select the source of wake up by buzzer, DAB or FM. Press
Select
button to confirm.
4. Press and to select the alarm station by last or preset station. Press
Select
button to confirm.
Noted: If you select the source of wake up by buzzer, it will not appear this selection.
5. Press and
to specify one of the following alarm frequency options: “DAILY”, “ONCE”, “WEEKENDS” and “WEEKDAYS”. Press
Select
button to confirm.
6. The alarm volume will be displayed. Press
or button to select your desire alarm volume. Press
Select
button to confirm
7. The alarm status will be showed. Press
or button to choose on/off the alarm, press
Select
to confirm. “SAVED” will be displayed.
Note:
- Same procedure applies for alarm 2 with
Alarm 2
button.
- Preset the station before you select the wake up source by preset stations.
- If you wake up with last radio, select your desire station, then press
button to turn off the radio before alarm time reaches. For the station
selecting, please refer to “
Listen to DAB/DAB+ radio
” and “
Listen to FM radio
”
Stopping the alarm
1. Alarm repetition
When the alarm time reaches, repeatedly press the top surface of the radio to select 5 – 10 – 15 – 30 minutes of snoozing. The alarm stops
and will sound again after the specified time.
2. Alarm stop
Press
Alarm 1
,
Alarm 2
or
Sleep
. The alarm 1 or alarm 2 will sound again the next day at the same time.
GB - 1
GB - 2
10.
Snooze
12:00
Snooze: Press anywhere on top surface of the unit
except the buttons
11. LCD display
12. Speaker
13. FM telescopic antenna
14. Standby
15. Phones jack
16. Micro USB port (DC in)
17.
Dimmer
+
/
-
: Dimmer light intensity of the screen
USB power supply adaptor
B
BACK VIEW
To DC in 5V jack
USB power cable
To AC outlet
Auto update
If it is the first time to turn on the unit, the time will be automatically synchronised from DAB/DAB+ station.
Noted:
- The auto update function will be activated if the unit can receive DAB/DAB+ signal.
- If you would like to select the auto update source, please refer to the menu setting.
Manual time and date setting
When the unit is in standby mode:
1. Press
Alarm 1
or
Alarm 2
button, “NO CLOCK” will be displayed, the unit will enter into time setting mode.
2. Then time digital will blink. Press
and
button to adjust the hour and minute value. Press
Select
button to confirm your setting.
DC IN
13
14 15 16
17
Mode/Menu
Station/Info
Snooze
1 2 3 4 5 6
12
7
10
11
8
9
R-3582 IB MUSE 001 REV0.indd 4
2014-5-23 16:50:58
