Muratec MFX-1820 Quick Start Manual Download Page 27

Page: 27 / 112

Getting Started

Loading Paper

Precautions when loading paper

Be careful not to get your hands cut by the edge of paper.

• When paper is curled, flatten it out before loading.

• Do not try to load more paper than shown by the mark or exceed the specified amount.

>PET<

• Align the paper guide securely against the edge of loaded paper.

If the paper guide isn’t fitted to the paper size, a paper jam may occur.

• If paper remains in the paper cassette when you wish to load new paper, take it out and combine it with

the new paper.

• Do not load paper mixed in size simultaneously.

NOTE

When paper remains in the paper cassette, we recommend waiting until all the paper has been used before load-
ing more.

Summary of Contents for MFX-1820

















































































































Search results

Summary of Contents for MFX-1820

Reviews:

Related manuals for MFX-1820

Brands by name

Popular brands

Muratec MFX-1820, Quick Start Manual

Search results

Summary of Contents for MFX-1820

Reviews:

Related manuals for MFX-1820

Brands by name

Popular brands