Beyond the basics
2.21
Reviewing or cancelling delayed commands
If you’ve stored a delayed command in your fax machine, it will hold it in memory
until it either completes the command successfully or reaches its maximum number of
redial attempts (see pages 1.27–1.28).
Your machine can store up to 99 delayed commands. It identifies each by a two-digit
command number ranging from 00 to 98.
The same procedure lets you both display your machine’s stored commands and have
a chance to cancel them, if necessary:
1.
Press
REVIEW COMMANDS
once.
•
If your machine is currently holding no delayed commands, it will beep
briefly and then display “No Command” on the display. To return to
standby mode, press
STOP
. To toggle the confirmation report feature for
only the next fax transmission, press
REVIEW COMMANDS
.
No Command
Review/Stop
•
If there are commands in your machine’s memory, the display will show in
order of time for performing the stored command:
C00:9-5552311
Program/Cancel
Here, you see command 00, followed by the phone number it’s to dial.
•
If the command is to perform a one-touch dial, one-touch number (such as
“[01]”) will appear instead of the phone number. (See “Using one-touch
numbers,” pages 2.8–2.11.)
C00:[01]
Program/Cancel
•
If the command is to perform a speed dial, speed dial number (such as
“S001”) will appear instead of the phone number. (See “Using speed-dial
numbers,” pages 2.11–2.14.)
C00:S001
Program/Cancel
•
If the command is to perform a group dial, group number (such as “G03”)
will appear instead of the phone number. (See “Considering call groups”
pages 2.8.)
C00:G03
Program/Cancel
•
If the command is to perform a broadcast, “Broadcast” will appear instead
of the phone number. (See “Broadcasting,” pages 2.17–2.19.)
C00:Broadcast
Program/Cancel
•
If the command is to perform a batch transmission, the display will show
its batch box number (such as “B01”) rather than the command number.
(See “Batch transmission,” pages 2.23–2.26.)
B01:9-5552311
Program/Cancel
•
If the command is to perform a continuous polling operation, the display
will show its continuous polling transmission number (such as “P00”)
rather than the command number. (See “Continuous polling,” pages 2.31.)
P00:9-5552311
Program/Cancel
Note:
If your machine is attempting to perform a command now, it will
appear on the display.
To cancel this command, skip to step 3.
To review a different command, proceed to step 2.
2.
If necessary, press
PROGRAM
repeatedly to scroll through currently stored
commands.
Note:
You may stop this operation any time you wish; just press
STOP
.
3.
If you want to cancel the currently shown command, press
CANCEL
.
The display will show:
C00:9-5552311
Check Program/Cancel
4.
To keep this command (i.e., to abort cancellation) but continue reviewing
stored commands, press
PROGRAM
.
To keep this command and stop reviewing commands, press
STOP
to return
your machine to standby mode.
To go ahead with cancelling the command, press
CANCEL
again and return to
step 2 to view other commands.
Note:
See also “Reviewing or cancelling parts of a broadcast,” next page.
You can toggle between cancelling the command and turning off/on the confirmation
report feature by pressing
REVIEW COMMANDS
.
Summary of Contents for MFX-1500
