Getting started
1.9
Setting up
Pick an installation spot before going ahead
To keep your fax machine in perfect working order, the location should be:
•
Clean — Dust build-up can damage your machine. (However, do not use a cover,
which can promote overheating! See next item.)
•
Open around the fax — Allow at least 16
″
of clearance around your machine.
Make sure that you never cover the machine: its vents must be able to “breathe.”
•
Away from direct sunlight — This helps avoid overheating. If you have to place
the fax near a window, install heavy curtains or blinds to protect the fax from
direct sunlight.
•
Dry — Avoid any location where splatters or sprays (such as from a water
fountain) could reach your fax machine.
•
Level, and vibration-free.
•
Near a phone socket — Your fax machine uses a standard (“modular”)
telephone socket, also known as an
RJ
-11.
•
Near an
AC
power outlet — The
AC
power cord is about 5’ long when stretched
to its limit (and that’s not the way to handle a power cord).
•
Away from heavy equipment — Do not set up your fax near a television, radio,
or heavy equipment — like air conditioners, copy machine or large printers —
that can generate strong electromagnetic fields. Electronic “noise” can interfere
with the operation of your fax machine.
Please heed these powerful tips
•
Use a standard three-pronged 230
VAC
outlet.
•
Make sure the outlet isn’t controlled by a wall switch. If it is, you’ll risk
inadvertent power off of your machine, causing you to lose fax messages.
•
Don’t use an outlet which also is supplying power to a large appliance, such
as a refrigerator or air conditioner. Such high-consumption appliances can cause
“draw-downs” (temporary drops in the power available for other equipment on
the circuit) which could damage your fax machine.
•
If at all possible, use an electrical surge suppresser, preferably one which
guards both telephone and electrical lines. This device helps to shield your fax
machine from damaging high-voltage electrical surges.
Voltage requirements:
230
VAC
±
10 %, 50/60 Hz
Power consumption:
Standby, 21
W
; transmission, 47
W
; reception, 592
W
;
copying, 621
W
; maximum (simultaneous copying,
communicating and scanning), 839
W
.
Summary of Contents for MFX-1500
