4
.6
Printing
1. Place the print media in the manual input tray with print side facing
up and adjust the paper guides to the width of the print media.
• Load a sheet of the envelope
with the flap side facing away from
you.
Make sure that the stamp area is at the top left and the end of
the envelope where the stamp area enters the tray.
• Load transparencies
face up with the adhesive strip on top
going into the tray first
.
Notes:
• Make sure that you select the
Manual
for
Paper Source
and the
correct paper size and type from your software application before
starting your print job. See
page 4.10
.
• When you use the manual paper tray, the paper must be loaded in the
automatic paper tray. By doing so, you can prevent a paper jam which
could occur in the manual tray.
All manuals and user guides at all-guides.com
