Muratec f-110 Operating Instructions Manual Download

Page: 79 / 160

.30

Stand-alone Fax

Notes:

• If ‘MEMORY FULL’ occurs while scanning into the memory, the display

will show:

Press

➛

❿

to select the option you want. If you select

CANCEL,

broadcasting will be cancelled. If you select

DONE

, your machine will

only broadcast previously scanned pages.

• If an error occurs while sending to a specific number, the machine

transmits the document to all the other numbers, then retries the
number that previously recorded an error. After completing
transmission, your machine will print the multi-communication report.

Delayed Fax

The F-110 can be set to send a fax at a future time.

1. Load your document

face down

with the top edge going into the

document feeder first. Adjust the Resolution and Contrast, if
necessary. For details, see

page 3.9

2. Press

ADVANCED FAX

on the front panel. The display will show the

first menu; BROADCASTING.

3. Press

➛

❿

until ‘DELAYED FAX’ appears, and press

START/ENTER

to access the Delayed FAX menu.

4. Enter the number of the remote machine using the ten number

keypad.

You can also press a one-touch button that includes group dial
buttons. If not, press

SPEED

(

), enter a 2-digit speed dial number,

then press

START/ENTER

. The stored number appears on the

display.

5. Press

START/ENTER

to confirm the number. The display asks if you

want to enter another fax number.

7. The document will be scanned into memory. The display shows the

memory capacity and the number of pages being stored. The machine
begins sending the documents in order of the numbers you entered.

ENTER ANOTHER NO

JOB

❿

CANCEL

❿

DONE

All manuals and user guides at all-guides.com

Summary of Contents for f-110

































































































































































Search results

Summary of Contents for f-110

Reviews:

Related manuals for f-110

Brands by name

Popular brands

Muratec f-110, Operating Instructions Manual

Search results

Summary of Contents for f-110

Reviews:

Related manuals for f-110

Brands by name

Popular brands