Muratec f-110 Operating Instructions Manual Download

Page: 150 / 160

Appendix

Connecting Other Devices, Overview

Connect other device in the order indicated.

F-110

LINE EXT.

Computer with
Internal Modem

External

Modem

Answering

Machine

Phone

Note:

• The F-110 must be connected to a wall jack. If it isn’t, it cannot

answer incoming fax calls.

• As the drawing indicates, always plug the

LINE

jack into one device

and the

EXT.

jack into another device.

• Some computers have a second

LINE

jack which is used to connect

the computer to a dedicated voice line. If you have a second

LINE

jack, check your computer’s documentation to ensure you are
connecting to the correct

LINE

jack.

All manuals and user guides at all-guides.com

Summary of Contents for f-110

































































































































































Search results

Summary of Contents for f-110

Reviews:

Related manuals for f-110

Brands by name

Popular brands

Muratec f-110, Operating Instructions Manual

Search results

Summary of Contents for f-110

Reviews:

Related manuals for f-110

Brands by name

Popular brands