Muratec f-110 Operating Instructions Manual Download

Page: 21 / 160

.10

Getting Started

Attaching the Supports

Document Input Support

Insert the document input support with the groove pointing to the rear
top of the machine.

Document Output Support

Insert the two tabs on the document output support into the slots on the
front of your machine.

Note

: The F-110 is shipped with the paper

output tray already installed. Extend
the tray to use.

Fold out the extender if necessary.

Extender

Fold out the extender if
necessary.

Insert one end first, then the other end by squeezing this
leg inward to make the tray easy to insert.

Extender

Fold out the extender if
necessary.

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for f-110

































































































































































Search results

Summary of Contents for f-110

Reviews:

Related manuals for f-110

Brands by name

Popular brands

Muratec f-110, Operating Instructions Manual

Search results

Summary of Contents for f-110

Reviews:

Related manuals for f-110

Brands by name

Popular brands