1
.20
Getting Started
Setting the Date and Time
The current date and time are shown on the display when the machine is
on and ready for use (Standby mode). The date and time are printed on
all transmitted faxes.
When you install the F-110 for the first time, or when the product is
without power for about 15 seconds, the display prompts you to reset the
date and time.
1. Press
SET UP
on the front panel. the display shows the first setup
menu; FAX NUMBER/NAME.
2. Press
➛
or
❿
until ‘TIME/DATE SETUP’ appears, then press
START/ENTER
to access the Time/Date Setup menu.
3. The display asks you to choose a date format. Press
START/ENTER
.
4. Press
➛
or
❿
until you find the desired date format, then press
START/ENTER
.
If you select USA, the date appears in format of Month-Day-Year. The
EUROPE format will be displayed in format of Day-Month-Year.
The display shows the currently set date and time using the selected
date format and asks you to set the month.
5. Enter the correct date and time for each item using the number keypad.
Each time you enter the appropriate number, the display asks you to
enter the next item in the following order: MONTH, DATE, YEAR, HOUR,
and MINUTE.
Enter the time in 24-hour format. For example, enter 2230 for 10:30
P.M.
If you enter an invalid number, the display does not proceed to the next
step. If this happens, re-enter the correct number.
6. When you are finished, press
START/ENTER
to save the setting. The
display returns to Standby mode and shows the date and time you have
set.
SET DATE & TIME
01-04-2002 10:30
JAN-04 12:30 FAX
(USA Format)
(USA Format)
All manuals and user guides at all-guides.com
all-guides.com
