A
.8
Appendix
Fax Branding
The Telephone Consumer Protection Act of 1991 makes it unlawful for any
person to use a computer or other electronic device to send any message via a
telephone facsimile machine unless such message clearly contains in a margin
at the top or bottom of each transmitted page
or on the first page of the transmission the following information:
(1) the date and time of transmission
(2) identification of either business, business entity or individual sending the
message; and
(3) telephone number of either the sending machine, business, business
entity or individual.
The Telephone Company may make changes in its communications facilities,
equipment operations, or procedures where such action is reasonably required
in the operation of its business and is not inconsistent with the rules and
regulations in FCC Part 68. If such changes can be reasonably expected to
render any customer terminal equipment incompatible with telephone company
communications facilities, or require modification or alteration of such terminal
equipment, or otherwise materially affect its use or performance, the customer
shall be given adequate notice in writing, to allow the customer an opportunity
to maintain uninterrupted service.
In the event your MURATEC fax machine appears to cause interference to other
electronic equipment, it can often be easily remedied. First determine if the
source of interference really is your FAX machine. To do this, turn its power off
and on while observing the equipment experiencing the interference. If the
interference disappears when you turn the FAX machine off, the following steps
can be very effective in correcting interference problems:
• Connect the FAX machine to an AC outlet which is on a different circuit
breaker from the equipment experiencing interference.
• Increase the distance between the FAX machine and the equipment
experiencing interference.
• Cable TV amplifiers and splitters are extremely prone to interference. Be
certain that they are as far as possible from the FAX machine and its AC
power and telephone cords.
• Replace “twin lead” antenna wire with shielded coaxial cable, and use proper
connectors and adaptors.
• Turn or relocate the receiving antenna. In most cases this is easily done by
sim-ply moving a radio. A TV antenna may need to be re-oriented or installed
in another area of the building.
• Consult your dealer, a reputable radio/TV technician, or an Amateur Radio
Operator for help.
* To locate an Amateur Radio Operator in your area, contact The American
Radio Relay League, 610 Main St., Newington, CT 06111.
All manuals and user guides at all-guides.com
