Multiva FX300 Comfort, Operation And Maintenance Manual

Page: 76 / 189

6.3.6. Area counter use
Figure. 6.3.6. - 85. Resetting area counters
The area seeded (1), seeding time (2) and average work performed (3) are displayed on
the screen. Use the up/down arrow buttons to select information on each eld
(Ha1, Ha2 and total machine quantity). The total quantity cannot be reset.
1. Reset the eld by pressing the RESET button (4).
Figure. 6.3.6. - 86. Con rming the resetting of area counters
2. Con rm the reset by pressing the YES button (1).
6.4. Feed units
The feed units are equipped with a push roller. In seed drills with a gearbox, the basic set-up of
feed quantities is done by altering the effective roller length with screw-type control wheels.
Fine-tuning is done from the machine’s transmission by adjusting the gearbox control lever.
In seed drills without a gearbox, the rough tuning of the feed rate is done by chain gears and
ne-tuning by altering the effective roller length with screw-type control wheels.
Operation and maintenance manual
FX300 and FX400 Comfort
1.00
76 (189)