Multiva FX300 Comfort, Operation And Maintenance Manual

Page: 172 / 189

Figure. 7.10.1. - 236. Calibration start screen in the user interface
2. Move the cursor to Speed sensor (SSF) (1) with the arrow buttons and press the OK
button (2).
The rst number starts to ash.
3. Change the value by pressing the up/down arrow buttons.
4. Con rm the value by pressing the right arrow button.
5. Repeat steps 3-4 for other numbers.
6. Con rm the correction by pressing the OK button (2).
7.10.2. Calibration of the speed sensor while driving
1. Select User setup and Seed drill on the user interface.
Figure. 7.10.2. - 237. Calibration start screen in the user interface
2. Move the cursor to Speed sensor (SSF Autocal) (1) and press the OK button (2).
Operation and maintenance manual
FX300 and FX400 Comfort
1.00
172 (189)