Multiva FX300 Comfort, Operation And Maintenance Manual

Page: 171 / 189

The scraper and inner plate under it must be together. Set the scraper as close to
the discs as possible but ensure that the disc does not make contact with the
scraper at any point. The disc should turn freely.
3. Tighten the scraper fastening bolt.
7.9.5.2. Adjusting the cover wheel scraper
Figure. 7.9.5.2. - 235. Cover wheel scraper
1. Loosen the two fastening nuts (1, 2) of the cover wheel scraper (3)
2. Adjust the distance between the scraper and the cover wheel by moving the scraper up
or down.
The distance between the scraper and the cover wheel should be 2-3 mm.
3. Tighten the scraper fastening nuts.
7.10. Comfort control system maintenance
7.10.1. Manual calibration of the speed sensor
1. First, select User setup (2. User setup) on the user interface Setup screen and then Seed
drill (6. Drill Setup).
Operation and maintenance manual
1.00 FX300 and FX400 Comfort
171 (189)