Multiva FX300 Comfort, Operation And Maintenance Manual

Page: 145 / 189

Figure. 7.3.2. - 188. Bottom ap open
1. Open the bottom ap by turning the control lever (1) downward.
Figure. 7.3.2. - 189. Cleaning of the small seed hopper
2. Clean the small seed hopper (1) with pressurised air.
3. Wash the small seed hopper with detergent and warm water.
4. If needed, clean the hopper with power wash.
CAUTION
Do not allow water to enter electrical instruments.
5. Dry the hopper with pressurised air.
6. Close the bottom ap of the feeder unit.
7.3.3. Cleaning the paint surface
Wear protective goggles and protective gloves when cleaning the paint surface.
Clean the paint surface at the end of the seeding season.
1. Clean the seed drill’s paint surface brushing and using pressurised air.
2. If needed, clean the paint surface with power wash.
Operation and maintenance manual
1.00 FX300 and FX400 Comfort
145 (189)