Multitone RPR 551IS, Technical Manual

Page: 29 / 127

RPR 550IS Series
TM1188 Issue 1 Page 2 - 9
Receiving Another Call Before the Previous Alert Has Finished
24. If a call is being shown on the display when another call arrives, the first call is placed
into memory (before viewing is complete) for later retrieval and the new alert proceeds.
Calls being reviewed from the memory are also displaced from the display by new
alerts.
Memory Recall
25. Received calls are automatically entered into the pagers memory store which can
accommodate five calls. To start the memory replay cycle, from the quiescent display,
press the Cancel button twice. If in extended alert press Cancel only once. The pager
displays the header of the first message or the phrase `
no messages
' if there are none.
If there are no messages the pager display returns to quiescent mode after 2s.
26. Uncancelled new calls are shown first. When all of the new messages have been
recalled the pager returns to status mode. Once new status has been removed it is
possible to view all the messages in the memory by pressing Cancel again.
27. The header refers to the first message screen and consists of a time stamp, if
Time-of-Day is active on the system, or by `
Mx ' (where x is 1-5), if Time-of-Day is
disabled plus the initial part of the message (or the whole message if 14 characters or
less). Press Cancel to step through each message header on the display. The most
recent call is displayed first and corresponds to the `1'.
28. To view a message fully do not press Cancel to step to the next header. The display
scrolls through automatically at 1.25s intervals except for the final screen. This
terminates in ** to denote the end of the message, and is shown for 2.5s.
29.
The Mute button can be used to speed up or slow down the viewing process. Press and
hold Mute to retain the current screen, release it to display the next screen immediately.
To view the same message again press the Mute button during the final message
screen. To go to the next message press Cancel any time during the viewing of a
message. If all the message headers have been viewed the pager display returns to
the quiescent condition.
Switching Off
30. To switch off the pager, press the Off button with a pencil or similar pointed object. If
the Permanent On option has been selected, each time Off is pressed the pager goes
through the full switch-on sequence, clearing all stored messages.