Multitech TalkAnytime TA410, User Manual

Page: 78 / 209

Chapter 5: Technical Configuration
Voice/Fax Parameter Definitions (cont’d) )
Field Name Values Description
Auto Disconnect
Automatic
Disconnect-
ion -- The Automatic Disconnection group provides four options which
can be used singly or in any combination.
Jitter Value 1-65535
milli-
seconds The Jitter Value defines the average inter-arrival packet deviation
(in milliseconds) before the call is automatically disconnected. The
default is 300 milliseconds. A higher value means voice
transmission will be more accepting of jitter. A lower value is less
tolerant of jitter.
Inactive by default. When active, default = 300 ms. However, value
must equal or exceed Dynamic Minimum Jitter Value.
Call
Duration 1-65535
seconds Call Duration defines the maximum length of time (in seconds)
that a call remains connected before the call is automatically
disconnected.
Inactive by default.
When active, default = 180 sec.
This may be too short for most configurations, requiring upward
adjustment.
Consecutive
Packets Lost 1-65535 Consecutive Packets Lost defines the number of consecutive
packets that are lost after which the call is automatically
disconnected.
Inactive by default.
When active, default = 30
Network
Discon-
nection 1 to 65535
seconds;
Default =
30 sec. Specifies how long to wait before disconnecting the call when IP
network connectivity with the remote site has been lost.
Multi-Tech Systems, Inc. TalkAnyTime User Guide
78