Multitech TalkAnytime TA2410, User Manual

Page: 22 / 235

TalkAnytime Quick Start Instructions Startup Tasks
22
TalkAnytime Startup Tasks
Task
Summary
Collecting Phone/IP
Details ( vital! )
The TalkAnytime must be configured to
interface with your particular phone
system and IP network. To do so,
certain details must be known about
those phone and IP systems.
Placement Decide where you’ll mount the unit.
Command/Control
Computer Setup:
Specs & Settings
Some modest minimum specifications
must be met. A data connection to the
TalkAnytime unit (whether via serial
port, USB2.0-with-adaptor, or web-
based) must be made.
Hookup Connect power, ground, phone, and
data cables per diagram.
Software Installation
This is the configuration program.
It’s a standard Windows software
installation.
Phone/IP Starter
Configuration
You will enter phone numbers and IP
addresses. You’ll use default parameter
values where possible to get the system
running quickly.
Use “Config Info CheckList” (page 26).
Phonebook/URL Starter
Configuration
The phonebook is where you specify
how calls will be routed. A special URL
determines how the TalkAnytime will
interact with your web server.
Connectivity Test You’ll find out if your TalkAnytime
system can receive phone calls from
visitors to your web site. That means
you’re up and running!
Troubleshooting
Detect and remedy any problems that
might have prevented connectivity.