Multitech TalkAnytime TA2410 User Manual Download Page 168

Page: 168 / 235

Operation and Maintenance

TalkAnytime User Guide

168

“Downloading” here refers to transferring program files from the PC to the nonvolatile “flash” memory of

the TalkAnytime. Such transfers are made via the PC’s serial port. This can be understood as a

“download” from the perspective of the TalkAnytime unit.

When new versions of the TalkAnytime software become available, they will be posted on MultiTech’s web

or FTP sites. Although transferring updated program files from the MultiTech web/FTP site to the user’s

PC can generally be considered a download (from the perspective of the PC), this type of download cannot

be initiated from the TalkAnytime software’s Program menu command set.

Generally, updated firmware must be downloaded from the MultiTech web/FTP site to the PC before it

can be loaded from the PC to the TalkAnytime.

Configuration Option

The “Configuration” option in the TalkAnytime Program menu launches the TalkAnytime Configuration

software program.

Configuration Port Setup

The Configuration Port Setup option in the TalkAnytime Program menu brings up the

COM Port Setup

screen of the TalkAnytime configuration software.

Summary of Contents for TalkAnytime TA2410












































































































































































































































Search results

Summary of Contents for TalkAnytime TA2410

Reviews:

Multitech TalkAnytime TA2410, User Manual, Page: 168 / 235

Search results

Summary of Contents for TalkAnytime TA2410

Reviews: