Multitech TalkAnytime TA2410, User Manual, Page: 83 / 235

TalkAnytime User Guide Technical Configuration
83
The Voice/FAX Parameters fields are described in the tables below.
Voice/Fax Parameter Definitions
Field Name Values Description
Default -- When this button is clicked, all Voice/FAX parameters are set to their
default values.
Select
Channel
1-24 (2410)
1-30 (3010)
Channel to be configured is selected here.
Copy
Channel
-- Copies the Voice/FAX attributes of one channel to another channel.
Attributes can be copied to multiple channels or all channels at once .
Voice Gain -- Signal amplification (or attenuation) in dB.
Input Gain +31dB
to
–31dB
Modifies audio level entering voice channel before it is sent over the
network to the remote VOIP. The default & recommended value is 0 dB .
Output Gain +31dB
to
–31dB
Modifies audio level being output to the device attached to the voice
channel. The default and recommended value is 0 dB .
DTMF Parameters
DTMF Gain --
The DTMF Gain (Dual Tone Multi-Frequency) controls the volume level
of the DTMF tones sent out for Touch-Tone dialing.
DTMF Gain,
High Tones
+3dB to
-31dB &
“mute”
Default value: -4 dB . Not to be changed except under supervision of
MultiTech’s Technical Support.
DTMF Gain,
Low Tones
+3dB to
-31dB &
“mute”
Default value: -7 dB . Not to be changed except under supervision of
MultiTech’s Technical Support.
DTMF
In/Out of
Band
Out of
Band, or
Inband
When DTMF is set to Inband , the DTMF digits are passed through the
TalkAnytime unit as they are received. In MultiVOIP products, which are related
to the TalkAnytime unit, DTMF can also be set to Out of Band. In such cases, the
TalkAnytime unit detects DTMF tones at its input and regenerates them at its
output.
FAX/Modem Parameters
Not applicable to TalkAnytime.