Multitech RouteFinder RF560VPN User Manual Download Page 72 | Manualshive

Page: 72 / 82

background image

Appendix E – Regulatory Compliance

Multi-Tech Systems, Inc. RF560VPN User Guide

72

Appendix E – Regulatory
Compliance Information

FCC Part 15 Regulation

This equipment has been tested and found to comply with the limits for a

Class B

digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

·

Reorient or relocate the receiving antenna.

·

Increase the separation between the equipment and receiver.

·

Plug the equipment into an outlet on a circuit different from that to which the receiver is connected.

·

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation of this device is subject to the following conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference that may
cause undesired operation.

WARNING

–

Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Industry Canada

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Reglement Canadien sur le matériel
brouilleur.

«
...
70
71
72
73
74
...
»

Summary of Contents for RouteFinder RF560VPN



















































































Reviews:

No comments

Related manuals for RouteFinder RF560VPN

Brand: D-Link Pages: 2

Brand: Paradyne Pages: 22

Brand: Idis Pages: 123

Brand: Idis Pages: 29

Brand: Idis Pages: 28

DirectIP DR-1304P

Brand: Idis Pages: 82

Brand: iDirect Pages: 130

Brand: Vanguard Pages: 4

ADSL 2/2+ Router with USB Port ADE-3410v2

Brand: Planet Pages: 62

Brand: Opengear Pages: 2

Brand: WaiLan Pages: 27

Brand: NA Pages: 22

Marconi OMS 1200

Brand: Ericsson Pages: 136

Brand: Zonet Pages: 53

Brand: National Instruments Pages: 130

Brand: TP-Link Pages: 176

Brand: NETGEAR Pages: 142

Brand: IMC Networks Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands