Multitech RouteFinder RF560VPN User Manual Download Page 20

Page: 20 / 82

Chapter 5 – Configuring the RouteFinder Using a Web Browser

Multi-Tech Systems, Inc. RF560VPN User Guide

Chapter 5 – Configuring the
RouteFinder Using a Web
Browser

Now that the cabling is completed and each PC on the network is configured to accept the IP
addresses that the RouteFinder will provide, you are ready to configure your Router.

About the Browser Interface

Initial configuration is required in order for you to begin operation. The browser-based interface eases
VPN configuration and management.

About IPSec

The VPN functionality is based on the IPSec protocol and uses 168-bit Triple DES (3DES) encryption
to ensure that your information remains private.

Start the RF560VPN Configuration

1. Connect your workstation.

Be sure your workstation is connected to one of the RF560VPN’s LAN ports.

2. Apply power.

Apply power to the RF560VPN RouteFinder and allow the LEDs to stabilize on the unit.

3. Set the workstation IP address.

The directions for setting your workstation IP address are covered in Chapter 3.

4. Open a Web browser.

At the Web browser’s address line, type the RF560VPN IP address: http://192.168.2.1. This is
the default address of your RouteFinder.

Press

Enter

Note:

Make sure your PC’s address is on the same network as the router’s address.

WINIPCONFIG

and

IPCONFIG

are tools for finding out a PC’s IP configuration: the default gateway and the MAC

address. In Windows 98/Me, type

WINIPCONFIG

In Windows 2000/NT, type

IPCONFIG

Summary of Contents for RouteFinder RF560VPN



















































































Search results

Summary of Contents for RouteFinder RF560VPN

Reviews:

Related manuals for RouteFinder RF560VPN

Brands by name

Popular brands

Multitech RouteFinder RF560VPN, User Manual

Search results

Summary of Contents for RouteFinder RF560VPN

Reviews:

Related manuals for RouteFinder RF560VPN

Brands by name

Popular brands