Multitech RouteFinder RF560VPN User Manual Download Page 58

Page: 58 / 82

Chapter 6 – Managing the RouteFinder Using a Web Browser

Multi-Tech Systems, Inc. RF560VPN User Guide

–

Upgrade Firmware

To access this screen, click the

Upgrade Firmware

button from the

System Tools

screen. The

Upgrade Firmware

screen displays.

The

Upgrade Firmware

option allows you to upgrade the newest firmware to your RF560VPN.

How will I be notified of new router firmware upgrades?

All Multi-Tech firmware upgrades are posted on the Multi-Tech Web site at

www.multitech.com

, where

they can be downloaded for free.
Your Router does NOT need the latest firmware upgrade if your Internet connection is already
successful, as firmware upgrades will not increase your connection speed or enhance your Router’s
performance.

1. Use the browse button to locate the file.

2. Click the

Start

button.

3. To exit this screen, select another option or return to the

Main Menu

Summary of Contents for RouteFinder RF560VPN



















































































Search results

Summary of Contents for RouteFinder RF560VPN

Reviews:

Related manuals for RouteFinder RF560VPN

Brands by name

Popular brands

Multitech RouteFinder RF560VPN, User Manual

Search results

Summary of Contents for RouteFinder RF560VPN

Reviews:

Related manuals for RouteFinder RF560VPN

Brands by name

Popular brands