Chapter 5 – Gatekeeper Software
Multi-Tech Systems, Inc. MultiVOIP Gatekeeper User Guide
76
Network Parameter Definitions
(cont’d)
Field Name
Values
Description
Call Proceeding
This parameter group pertains to the Gatekeeper’s
handling of Q.931 “call-proceeding” messages.
Send
Immediately
Y/N
Immediate return of call-proceeding message to
originating endpoint. When selected, the Gatekeeper
will send the Q.931 call –proceeding message to the
originating endpoint immediately after receiving that
endpoint’s call setup request.
With H.245 Addr
Y/N
When enabled, Gatekeeper supplementary services will
remove the H.245 address from the outgoing setup in
order to prevent early H.245 establishment to the call’s
destination. This destination can be changed during
Forward on Busy or during Forward on No Response
(CFNR).
After Overlapped
Sending
Y/N
Delayed return of call-proceeding message to originating
endpoint. When selected (in routed mode), the
Gatekeeper will send a Q.931 call-proceeding message
to the originating endpoint after it receives a return call-
proceeding message back from the destination
endpoint.
Call Mode
Direct Mode
Sets the call mode to direct. In this mode, terminals
send ARQ messages to the Gatekeeper, but pass the
call signaling and media control signaling directly
between them.
Routed Mode
Sets the call mode to routed. In this mode, terminals
pass admission requests and call signaling through the
Gatekeeper. Media control information is sent directly
between the terminals.
Note: Though direct calls consume fewer Gatekeeper
resources, call control is better for indirect (or routed)
calls.
Configuration Parameters
Max Number of
Calls
10
The maximum number of concurrent calls allowed in the
zone.
Max Total BW
(KBps)
The amount of bandwidth in Kbps that call traffic can
consume at any given time.
Registration TO
(hrs)
Registration Timeout. Sets the number of hours of
inactivity after which the dynamic registration of a ter-
minal expires. Only the dynamic (online) properties will
be unregistered. If the endpoint is also static
(predefined), the static properties remain valid.
Summary of Contents for MultiVOIP MVP100GK Gatekeeper
Page 1: ...MVP100GK User Guide...
