Multitech MultiVOIP 200 MVP200, User Manual

Page: 80 / 113

80
MultiVOIP 200 User Guide
Remote Management
This section describes typical client applications that can be used to configure the MultiVOIP 200
remotely. It is important to note that although any subsequent changes to configuration can be made
using these applications, the initial setup and configuration of the MultiVOIP 200 must be done on the
local PC using the MultiVOIP 200 software provided with your unit.
Although establishing access to the MultiVOIP 200 varies between applications, the configuration
functions mirror those of the MultiVOIP 200 software. For more information on MultiVOIP 200
software, refer to
Chapter 4 - MultiVOIP 200 Software .
Telnet
A typical Telnet client application is described next. The MultiVOIP 200 has a built-in Telnet Server
that enables Telnet client PCs to access the MultiVOIP 200. A typical Telnet client is allowed to
configure the MultiVOIP 200. In addition, the MultiVOIP 200 can be remotely accessed and
configured from anywhere on the Internet through its Web interface.
The TCP/IP stack has to be loaded before the Telnet client (a Windows application) will run. The
Telnet Server option has to be selected from the Applications Setup dialog box using the MultiVOIP
200 Configuration icon. Click Start I Run and enter telnet in the Run window and a blank Telnet
screen is displayed. Click Connect | Remote System and the Connect dialog box is displayed.
Select from the drop-down list (or enter) a Host Name (the IP address of the MultiVOIP 200). In this
example, the Host Name is 192.168.2.8. Then select telnet from the Port drop-down list and vt100
from the Term Type drop-down list.
Once you have entered a valid Host Name (IP address), Port, and Term Type, click the Connect
button to be connected to the target MultiVOIP 200 - the MultiVOIP Telnet Server screen is displayed.
MultiVOIP Telnet Server Menu
The MultiVOIP Telnet Server menu provides three basic options: Voice over IP Configuration, Phone
Directory Database, and Phone Directory Configuration. A further option enables you to close the
Telnet session.