Multitech MultiVOIP 200 MVP200, User Manual

Page: 67 / 113

67
Chapter 4 - MultiVOIP Software
Applications Setup
Clicking the Others button on the Setup menu displays the Applications Setup dialog box. This
dialog box allows you to enable SNMP Agent (the default is
disabled) and set up all the necessary
parameters; enable or disable various remote configuration methods such as TFTP (Trivial File
Transfer Protocol) Server, Web Server, Dumb Terminal Management, and Telnet Server; and assign a
Password to the MultiVOIP 200 for Internet security. These applications enable remote viewing and
changing of the MultiVOIP 200 configuration, or updating firmware, from anywhere on the connected
internetwork.
Verify that the desired applications are enabled (checked). The default condition is all applications are
checked. To disable a given application, click to uncheck the check box and disable support.
SNMP related operations can be performed only when the SNMP Agent is enabled (checked) on this
dialog box. The IP address of the system (i.e., SNMP Manager) that will receive the Traps from the
MultiVOIP 200 should be entered in the IP Address field in the Trap Manager group. The Community
Name of the SNMP Manager receiving the Traps can be a maximum of 19 characters and is case
sensitive. The default Port Number of the SNMP Manager receiving the Traps is 162. The MultiVOIP
200 currently supports a maximum of two community users at a time, and they can be assigned either
Read/Write or Read Only rights. Note: if you have SNMP client software and enable SNMP Agent,
you can (in the lower right corner of the dialog box) choose to read logs through the SNMP Manager
instead of the COM port.
The Password group enables you to enter a password, up to 13 alphanumeric characters, to be used
for Internet Security. Once the password is entered (in the MultiVOIP 200 Password field) and
confirmed (in the Confirm Password field), remote users will be queried to enter the password before
gaining access to the MultiVOIP 200 for configuration purposes.
Note: If you forget your password, contact Technical Support for instructions.
For more information on using these applications, click the on-line Help button or refer to Chapter 5,
Remote Configuration and Management.