24
MultiVOIP 200 User Guide
Installing Your MultiVOIP 200 Software
The following installation procedures do not provide every screen or option in the process of installing
the MultiVOIP 200 software. It is assumed that a technical person with a thorough knowledge of
Windows and the software loading process is doing the installation. Once you have installed the
software, you will be instructed on how to configure your MultiVOIP 200, and finally, on how to deploy
your MultiVOIP 200. Additional information on the MultiVOIP 200 software is provided in Chapter 4,
MultiVOIP 200 Software, and in the on-line Help.
Note: The phonebook directory configuration process is different depending on whether or not you
have an enabled H.323 Gatekeeper resident in your network. The section on “Configuring Your
MultiVOIP 200” will explain these differences.
If your network includes a Multi-Tech Gatekeeper, Gateways, or other third-party VOIP Gateways or
endpoints that support H.323 (for example, Microsoft NetMeeting), you will likely want to install H.323
software.
The MultiVOIP 200 software, Quick Start, and User Guide are contained on the MultiVOIP 200 CD.
The CD is auto-detectable, so when you insert it into your CD ROM drive it will start up automatically.
When you have finished configuring your MultiVOIP 200, you can view and print the User Guide by
clicking on the View Manuals icon and selecting either the Quick Start or this User Guide.
CAUTION: If you are installing a MultiVOIP 200 behind a Firewall, the Firewall must support H.323.
Refer to your Firewall user documentation to enable H.323 support.
1.
Make certain that your MultiVOIP 200 has been properly cabled and that it is powered on.
2.
Insert the MultiVOIP 200 CD into a CD-ROM drive. The CD is auto-detectable, so it starts
automatically. It may take 10 to 20 seconds for the Multi-Tech Installation CD screen to appear.
If the Multi-Tech Installation CD Screen does not appear automatically, click My Computer, then
right-click the CD-ROM drive icon, click Open, then click the Autorun icon.
3.
When the Multi-Tech Installation CD Screen is displayed, click the Install Software icon and
choose H.323 compatible from the Select Software dialog box.
Summary of Contents for MultiVOIP 200 MVP200
