Multitech MultiVOIP 200 MVP200, User Manual

Page: 7 / 113

7
Chapter 1 - Introduction and Description
Preview of this Guide
This guide describes the MultiVOIP 200 and tells you how to install and configure the unit. The
information contained in each chapter is as follows:
Chapter 1 - Introduction and Description
Chapter 1 describes the MultiVOIP 200 and provides a typical application, describes front panel
indicators, back panel connector descriptions, and lists relevant specifications.
Chapter 2 - Installation
Chapter 2 provides information on unpacking and cabling your MultiVOIP 200. The installation
procedure describes each cable connection.
Chapter 3 - Software Loading and Configuration
Chapter 3 provides instructions for software loading and initial configuration. Later chapters, as well
as the on-line Help, describe the MultiVOIP 200 software in more detail.
Chapter 4 - MultiVOIP 200 Software
Chapter 4 describes the MultiVOIP 200 software package designed for the Windows environment.
For explanations and parameters of each field within a dialog box, refer to the Help.
Chapter 5 - Remote Configuration and Management
Chapter 5 provides procedures for changing the configuration of a remote MultiVOIP 200. Remote
configuration enables you to change the configuration of a unit by simply connecting two modems
between the two MultiVOIP 200s and remotely controlling the unit. Chapter 5 also describes typical
client applications (i.e., Telnet and Web-based management) used for remote configuration of the
MultiVOIP 200.
Chapter 6 - Warranty, Service and Tech Support
Chapter 6 provides instructions on getting service for your MultiVOIP 200 at the factory, a statement
of the limited warranty, information about our Internet presence, and space for recording information
about your MultiVOIP 200 prior to calling Multi-Tech’s Technical Support.