Multitech MultiModem MT5634ZPW-PCI, Owner'S Manual

Page: 42 / 94

MT5634ZPW-PCI 42
Owner’s Manual
Command: X
n
Result Code Selection
Values: n = 0–7
Default: 4
Description: X0 Basic result codes ( e.g., CONNECT); does not look
for dial tone or busy signal.
X1 Extended result codes (
CONNECT 56000 V42bis,
CONNECT 33600 V42bis, etc.); does not look for dial
tone or busy signal.
X2 Extended result codes with
NO DIALTONE; does not
look for busy signal.
X3 Extended result codes with BUSY; does not look for
dial tone.
X4 Extended result codes with
NO DIALTONE and
BUSY.
X5 Extended result codes with NO DIALTONE and
BUSY.
X6 Extended result codes with
NO DIALTONE and
BUSY.
X7 Basic result codes with NO DIALTONE and BUSY.
Command: Y n Long Space Disconnect
Values: n = 0
Default: 0
Description: Y0 Disable sending or responding to long space break
signal on disconnect.
Y1 Enable sending or responding to long space break
signal on disconnect. (Not supported.)
Command: Z n Modem Reset
Values: n = 0 or 1
Default: None
Description: Z0 Reset modem to profile saved by the last
&W
command.
Z1 Same as Z0.
Command: &B n V.32 Auto Retrain
Values: n = 1
Default: 1
Description: &B0 Disable V.32 auto retrain. (Not supported.)
&B1 Enable V.32 auto retrain.