Multitech MultiModem MT5634ZPW-PCI, Owner'S Manual

Page: 25 / 94

MT5634ZPW-PCI
25
2 Installation
Simple Operations
You can dial by using the ATD command and the phone number
of the modem with which you wish to connect, e.g.,
ATD6127853500. Your modem will dial the number; a
“scrambling” noise is heard as the modem negotiates the kind of
connection it can make, and once the modems have settled on a
common connection, a connect message on your computer’s
video is displayed. To hang up a call, enter +++ATH<CR>.
Your modem will return on hook. Your video now displays
OK,
signifying that your modem is ready for your next command.
Software Configuration
Communications software must be configured to work with the
MultiModemZPW-PCI, your computer, and the remote system it
is calling. Fortunately, most communications programs make
the process easy by providing a default initialization string to
your modem as well as defaults for most of the other required
parameters. Some software programs allow you to select your
modem type from a menu. By this method, initialization strings
that correspond to a particular modem type can be selected to
operate optimally with the software it is utilizing.
*
: Refer to your respective software manual for further
information on your communications software.
Other software programs require you enter an initialization string
in the software modem setup screen. If this is the requirement in
your software application, enter the following command string to
initialize your modem:
AT&F<cr>. This setting configures your
modem to operate optimally with the software it is utilizing.